100/240V 50/60 Hz
Sono da sempre caratteristiche che contraddistinguono i washlight per le applicazioni più professionali.
Con i proiettori della gamma Clay Paky K-EYE K20 HCR, Claypaky propone degli strumenti studiati specificamente per queste applicazioni. Quello che li caratterizza maggiormente è l’impiego di una sorgente LED a 6 colori: il classico RGB con in aggiunta Amber+Cyan+Lime, gestiti da un algoritmo software Osram. Questa sorgente LED consente la produzione di luce ad altissima qualità, con un CRI che si attesta su valori mai raggiunti prima da nessun altro proiettore washlight classico, se non da Clay Paky K-EYE K20 HCR.
100/240V 50/60 Hz
750 VA
Light sources: 6-color LED modules
LED module: R+G+B+Amber+Cyan+Lime
Number of LEDS: 37
LED life expectancy: min. 50,000h
Total lumen output: 11,000 lumen
Typical lumen manteinance: 70%@50,000 hours
Typical CRI value > 97 up to 99
Optics featuring 6-color LED module system + rod-bar mixing system + front lens
6°- 50° linear electronic Zoom
Color system: R+G+B+Cyan+Amber+Lime LED module
Color Temperature control: Linear from 2500K to 8000K (CTO controlled mode plus RAGCB correction)
Control of the colors: RAW mode, HSL mode, RGB mode, CMY mode
– RAW mode Enable specific control of each color
– HSL mode function is based on algorithm. HSL parameters: HUE, HUE fine, Saturation, Crossfade, Path, Tint
– RGB mode The projectors works in the same way as a classical RGB fixture
– CMY mode The projectors works in the same way as a classical CMY fixture
Halo Emulation 750W, 1000W, 1200W, 2000W, 2500W lamp emulation
Gamma Wave: Different chromatic curves for each color
Macro: Dedicated color macro channel with 80 preselected colors
Electronic and linear dimmer, 16 bit
Strobe 24 flash/sec. Electronic, instant open and blackout. Variable speed pulsation
27/31 DMX 512 control channels
Control signal: USITT DMX 512
Protocols: RDM, WebServer and Art-Net
Display: Graphic LCD backlit b/w display
Display battery: Long life self-charging buffer battery
Pan/Tilt Resolution 16 bit
Dimmer Resolution 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Firmware update: Software upload through DMX input
Structure in aluminium with die-cast plastic cover
Handles Two side handles for transportation
Device locking PAN and TILT mechanisms for transportation
Optional frame for external gels and frost filters
Optional top hat (adjustable with the Zoom movement)
PAN range: 540°
Resolution: PAN = 2.11° – PAN FINE = 0.008°
TILT range: 210°
Resolution: TILT = 0.960° – TILT FINE = 0.004°
Long-life auto-charging buffer battery
Preset color and graphic effect macros
Function reset controllable from a central control unit
Menu-driven internal self-test function
Electronic check-up of every single parameter with error alarm
DMX level monitoring on each channel
Automatic internal data transmission error diagnostics
Firmware upgrade with no power
Firmware transfer from one light to another
Minimum distance of illuminated objects: 0.2 meters (8”)
Minimum distance from flammable materials: 0.2 meters (8”)
Max ambient temperature: 40°C (104°F)
Max temperature of the external surface: 90°C (194°F)
Bipolar circuit breaker with thermal protection
Automatic break in power supply in case of overheating
Forced ventilation withaxial fans
Working position: Any
Hanging system: 2xfast-lock omega clamps (1/4 turn) on the base
Optional 48-51mm, max300Kg clamps; Ø 4mm, lenght680mm safety cable
In conformity with the European Directives:
• 2014/35/EU – Safety of electrical equipment supplied at low voltage (LVD)
• 2014/30/EU – Electromagnetic Compatibility (EMC)
• 2011/65/EU – Restriction of the use of certain hazardous substances (RoHS)
• 2009/125/EC – EcoDesign requirements for Energy-related Products (ErP)
22.5 Kg