- Length: 266 mm (10.5 in.)
- Width: 287 mm (11.3 in.)
- Height: 329 mm (13.0 in.)
- Weight: 5.5 kg (12.2 lbs.)
ROBE PATT 2017™
Settembre 19, 2018
PROLIGHTS SOLAR 21
Settembre 19, 2018
MARTIN RUSH PAR 2 RGBW
The RUSH PAR 2 RGBW Zoom is a bright single-lens LED PAR Can with fully premixed color from 12 RGBW LEDs and a spectacular 10 – 60 ° zoom. It offers electronic dimming and strobe and comes with a flexible bracket for floor or truss mounting.
CARATTERISTICHE TECNICHE MARTIN RUSH PAR 2 RGBW
- Bright LED PAR Can
- 12×10 W RGBW LEDs
- Single-lens wash with fully premixed color
- 10° to 60° zoom
- Electronic dimming and strobe
- Temperature-controlled fan cooling
- Flexible bracket – floor or truss-mounted
- 5-pin XLR
- Light source: 12 x 10 W RGBW Osram Ostar LEDs
- Zoom range: 10° – 60°
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)
- Color mixing: RGBW
- Color selection: 33 color presets plus full white, ‘color wheel’ effects
- Electronic dimming: 0 – 100%
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic ‘shutter’ effect: Instant open and blackout
- Zoom: Motorized
- Control options: DMX, stand-alone scene
- DMX channels: 5/9
- White balance control: RGB adjustment
- DMX address setting: Control panel with LCD display
- Stand-alone programming: Control panel with LCD display
- Protocol: USITT DMX512/1990
- Cooling: Forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 40° C
- Minimum ambient temperature (Ta min.): 0° C
- Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 520 BTU/hr.
- AC power: 100-240 V nominal, 50/60 Hz
- Typical total power consumption: 151 W
- Mounting points:
- Driver: 1x Half-couple clamp, 1x Safety attachment point
- PATT2017:M12 mounting for clamp or spigot
- Operating position:
- PATT Driver: Floor standing on mounted on truss in vertical position
- PATT2017: any operating and mounting position
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
- EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety (pending): UL 1573US EMC: 47 CFR Part 15 Class A
- Canadian safety (pending): CSA C22.2 No. 166
- Canadian EMC: ICES-003 Class A
- Australia/NZ: C-TICK N4241
- 120 V, 60 Hz: 1.3 A, 151 W, PF 0.993
- 230 V, 50 Hz: 0.7 A, 148 W, PF 0.961
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
- Gel Frame for RUSH PAR 2 (set of 10): P/N 46000106
- Cables, 16 A, for connection to power in chains
- Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with
- PowerCon input connector, 3 m (9.9 ft.): P/N 11541508
- Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 1.4 m (4.6 ft.): P/N 11541509
- Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 2.25 m (7.4 ft.): P/N 11541510
- Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3.25 m (10.7 ft.): P/N 11541511
Power connectors
- Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804
- Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey:P/N 05342805
DMX link
- DMX termination plug, 3-pin male XLR: P/N 91613017
Installation hardware
- G-clamp: P/N 91602003
- Half-coupler clamp: P/N 91602005
